Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (3)
  • Click a star to rate this product
    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 5.00 (3)
  • Click a star to rate this product
General Electric DC300 DC-300 Adjustable Speed Industrial Drive.



Sell Surplus: Have a 7VDYD034IB0110 to sell? Sell Now
Exchange Credit: Learn more about our exchange credit program
  • Part Number: 7VDYD034IB0110
  • SKU: 7VDYD034IB0110GD
  • Manufacturer: GE Drives
  • Series: DC300 Drives

Product Description

The 7VDYD034IB0110 is a General Electric DC300 Adjustable Speed Industrial Drive. This drive is no longer being supported by GE and has become difficult to locate. AX Control tries to keep this drive stocked as a refurbished or new surplus part. Please contact us directly for availability and pricing information for this drive.

The 7VDYD034IB0110 should be mounted onto a flat surface like a panel. There are mounting brackets on the back of the chassis that can be used to mount the drive to a panel.  It has an open-style chassis which indicates that this drive should only be used in an indoor environment. The chassis is not dust or drip tight, so be sure to keep it in a clean, dry environment. It should not be exposed to corrosive materials.  The chassis has six red LED indicators that are located just above the GE product label.

The 7VDYD034IB0110 has an open chassis and as a result, the bottom of the drive’s circuitry is exposed. One of the components that is exposed is a printed circuit board (PCB). It is labeled 531X136TBGAAC1. It is a TB option card. There are two ribbon cables that can be seen connected to this board that run to a board just below it. There are two green terminal strips, a male pin connector, and a set of jumpers. Below this board is another PCB. It has three ribbon connections (two are from the TB option card). There is a red varistor, three terminal strips, and three relays.

Frequently Asked Questions about 7VDYD034IB0110

What does the diagnostic readout 001111 mean?

The diagnostic readout 001111 has a fault number or FL15 and a fault name of VFBLS which means a loss of armature voltage feedback (L, T) -The voltage feedback wires are disconnected or damaged. -FU 4-DC fuse is open (regenerative drives only). -5PL is disconnected or damaged. -The P7-SFB ZERO on the Process Interface card is misadjusted. -The CFB jumpers are incorrect- check JP3 and JP4 on the Power Supply card. -VFB circuit failure- check test point VFB.    

What does the diagnostic readout 010000 mean?


The diagnostic readout 010000 has a fault number FL16 and the fault name NOTRP and means that there is a trip from the N.O. interlock on the application card (L, T). -External input at 4TB8 (13PL-8). -The application card is absent but was selected by a soft jumper, check ADR010-APPJP.  

What does the diagnostic code 010001 mean?

The diagnostic code 010001 has a fault number of FL17 and a fault name XSTOP which means the coast stop was tripped (L, T). -Check for input at XSTOP on 3TB1 (6PL-16) - Check ADR004-STPJP.

What does diagnostic readout 010010 mean?


The diagnostic readout 010010 has a fault number of FL18 and a fault name STALL which means there is a stalled overcurrent.  -There are mechanical problems. -ADR046-STLTH and ADR047-STLGN are set incorrectly. -The CFU2 on the Power Supply card is open.  -The field current is set too low. -The current feedback isolator is failing.  -The 1PL is disconnected or damaged. -The P3-CFB ADJ on the Power Supply card is misadjusted.

Repair Services For 7VDYD034IB0110

Type Lead Time Price Action
Repair Service 1-2 weeks $1392

Our highly skilled technicians can repair your 7VDYD034IB0110. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:

  • 48-72hr Rush Repair
  • Detailed Repair Reports
  • AX Control Certificate of Warranty

AX Control Warranty Info

All products we sell are backed by our unparalleled warranty. A warranty certificate will be provided with your order upon request.
All PLCs, HMIs, and Turbine Control Boards: 3 Years
All AC/DC and Servo Drives: 2 Years
All Motors: 1 Year
Learn More

7VDYD034IB0110 Manuals, White Papers, Data Sheets, and Troubleshooting