Product Description
The DS215TCCBG3AZZ01A is a GE Common Extended Analog I/O Board (TCCB).
The software for DS215TCCBG3AZZ01A can be configured. The TCCB card is in location 3 on the TC2000 <C> core. It is specifically labeled “Turbine Control <C> Micro Application Card B” and it is only meant to handle alarm, communication, and indication. When configuring the DS215TCCBG3AZZ01A, it has the ability to fully define the <C> core functions RTDs, milliamp inputs, and the filtering of those RTDs and milliamp inputs.
The DS215TCCBG3AZZ01A has four main jumpers that provide a few different functions. Jumper J2 is normally enabled but when it is disabled it disables the serial RS-232 port. The BJ1, BJ2, and BJ3 jumpers should all be inserted to provide normal operation and should be in the out position to test the card. When they are in the in position, they enable the oscillator.
The DS215TCCBG3AZZ01A is a part of the I/O control system in a Mark V LM system. It has the ability to be mounted to a panel within a Turbine Control cabinet. There are up to four different sections of I/O control systems within the cabinet. In a section of I/O control, there are 9 slots that can be taken up or left blank. The DS215TCCBG3AZZ01A takes up one of the smaller slots within the section. When mounting this board, be sure to wear an antistatic wristband to prevent any type of static damage to the board’s circuitry. This cabinet should only be used in an indoor environment and should be kept in a clean, dry environment.