DS215GHDCG5AZZ01A GE Mark V Turbine board
The DS215GHDCG5AZZ01A is a GE Mark V board component manufactured for use within one of the company’s later Speedtronic systems. The Speedtronic line, which was used for the control for steam or gas turbines, was a popular control system that began with the release of the MKI in the 1960s and continued its development through the turn of the century. Mark V board components are no longer actively manufactured by General Electric, but they can be purchased as like-new reconditioned and fully tested boards from AX Control inventory with warranty service provided at no extra cost.
The DS215GHDCG5AZZ01A is a large board that has been marked along two edges to allow for easy alignment. The board is drilled in each corner and along the board edges for mounting options. Multiple standoffs have been pre-mounted to the board’s surface to allow the installation of auxiliary boards. Auxiliaries typically communicate with the motherboard using cable connections that plug into male vertical pin cable connectors; there are six of these connectors on the board’s surface. Additionally, the board has single-pin connectors and header-connectors.
Other board components used on the surface of the DS215GHDCG5AZZ01A include oscillating chips, field programmable gate arrays (FPGAs,) EPROMS, and many other types of integrated circuits. The board uses resistor network arrays, resistors, jumper switches, capacitors, LED indicators, diodes, and also has a reset switch.
For a more complete look at the DS215GHDCG5AZZ01A, including detailed information regarding installation and maintenance, please refer to technical support products like manuals or user guides.