Product Description
The DS2020FEANRX050A is a board component designed for use with the GE Mark V system. The Mark V was one of General Electric’s successful Speedtronic turbine control systems used for the management of industrial gas and steam turbines of various complexity and size. While this system is now in legacy status and parts cannot be purchased directly from the OEM, AX Control maintains on-hand stock to quickly fulfill your orders, and additionally offers this DS2020FEANRX050A Field Exciter Module on a repair basis. It is important to recognize that this DS2020FEANRX050A Field Exciter Module exists as a revised version of a previously-existing Mark V Series product; modifying the DS2020FEAN board through its inclusion of a singular, A-rated product revision.
Hardware Tips and Specifications
The DS2020FEANRX050A is a MKV 50 amp power supply, and a 50/60 Hz single-phase unit with a DC output of 500 volts, 50 A. The DS2020FEANRX050Aunit weighs approximately 56 pounds before our team prepares and packages it for shipment. The DS2020FEANRX050A is designed as a semi-open metallic chassis with internal circuitry accessible from two sides, which is more than likely the primary contributing factor behind this Mark V Series product's status as a PCB with a special assembly version. There are four factory-made holes on the unit, one per corner; these are located to allow for proper installation and mounting of the unit. The closed side of the chassis also includes factory-drilled holes. Internal wiring on the DS2020FEANRX050A includes a basic number of voltage-limiting hardware components such as electrolytic capacitors, resistors, and diodes. There is a ten-pin connector (male) located above the unit’s transformer components, and this DS2020FEANRX050A Field Exciter Module includes wiring to allow for connections to external components.
As identified in original General Electric instructional manual materials; this DS2020FEANRX050A Field Exciter Module is a versatile style of General Electric printed circuit board as it is able to accept two total types of field supplies; both non-plugging NRX field supply or plugging NRP field supply. The DS2020FEANRX050A product number itself is a valuable tell of many of this DS2020FEANRX050A unit's hardware specifications, including its DS2020 Mark V Series semi-open metallic construction, its FEAN functional acronym, A special style of printed circuit board protective covering, and a singular A-rated functional revision.
