About the DS2020FEANRP100A
This DS2020FEANRP100A General Electric printed circuit board product offering was originally designed and produced for placement in the Mark V Turbine Control System Series. This DS2020FEANRP100A device's greater Mark V Series has a set series of applications in the management and control systems of popular and compatible gas and steam turbine automated drive assemblies.
This DS2020FEANRP100A device's greater Mark V Series is still able to attract some renewing demand on the greater automated industrial products marketplace, most likely given the fact that it is one of the last-developed GE Mark product series to incorporate the patented Speedtronic control system technology into a range of its different offerings.
Hardware Tips and Specifications
There are many components that make up the actual special modular assembly fo this DS2020FEANRP100A Mark V Series product offering. For starters, one can view as series of electrolytic capacitors that rated at voltage ratings of 660 VAC. Next to this set of capacitors on the left are:
- fourteen black-colored resistors
- four blue-colored resistors
- twelve yellow-colored capacitors
- thirteen gray-colored diodes
In addition to the distinct coloration differing from each of this DS2020FEANRP100A PCB's voltage limitation-minded hardware components, they should all be further differentiated through their own factory-printed nomenclature labels as well.
The DS2020FEANRP100A functional product number itself can be identified as a primary information source of DS2020FEANRP100A PCB hardware detail. For example, the DS2020FEANRP100A functional product number begins with a dual-functional naming component in the DS200 series tag delegating this DS2020FEANRP100A PCB's normal Mark V Series assembly as well as its domestic location of original manufacture. Some of the other relevant hardware details revealed in the DS2020FEANRP100A functional product number include this device's:
- FEAN functional product acronym
- A-rated primary functional revision
There is a 10-pin male connector positioned towards the top left side of the DS2020FEANRP100A card; it is placed just above four white-colored transformers.The DS2020FEANRP100A is 600 volts, 50/60 Hz, and is single-phase, and makes use of a DC output of 500 volts and 50 amps.
Before making any purchase decision on this DS2020FEANRP100A product, it is important to consider the fact that it weighs roughly 56 lbs; mostly as result of its acceptance of a long rectangular metallic chassis for mounting purposes. There are two open-vented sides that can allow the user access to the internal circuitry of the DS2020FEANRP100A PCB's power supply. On the back of the DS2020FEANRP100A PCB's metallic chassis exist four total factory-drilled holes in each of the four corners; these are meant for safe and normative installation purpose. Meanwhile, the closed sides of the DS2020FEANRP100A chassis are also factory-drilled with their own holes. At the very bottom of the DS2020FEANRP100A are two large cables meant to connect and be screwed on to Mark V Series connectors; they are kept in position through the use of two nuts. This DS2020FEANRP100A Field Exciter Module operates with two distinct types of non-reversing field supplies; both NRX or non-plugging supplies or NRP or plugging styles of field supplies.
