Product Description

The GE UC2000 Motherboard DS200UCIBG3A features one microprocessor and multiple PROM modules. It also contains 1 block of 10 LEDs and 1 50-pin connector. The GE UC2000 Motherboard DS200UCIBG3A also is populated with 1 connector to support the attachment of other boards and 2 3-pin connectors. The board also contains an integrated standard female 8-pin circular connector. The circular socket connects to a cable with a matching circular connector. To connect them, align the pins on the cable with the connectors on the circular connector and press the connector into the board. Use one hand to press the connectors together and use your other hand to steady the board and keep it in place. Route the round cable away from power cables to prevent interference in the signals. Follow the cable routing used by the round cable when the connector was attached to the defective board.

The GE UC2000 Motherboard DS200UCIBG3A is 11 inches in height and 8.5 inches in width. The board is attached to the interior of the rack cabinet with four screws that are inserted in the four corners of the board. When you install the board, use one hand to tighten the screw and with the other hand, hold the screw to prevent it from falling in to the interior of the rack cabinet. If the washers and screws fall, retrieve then before you restart the drive. Loose screws might cause a short between components. A screw might also lodge in the moving parts and hinder the free movement of the motor or other components.