Product Description
The DS200TCSAG1A is a UC Transducer Interface Card that was initially created to be a part of GE’s Speedtronic Mark V LM series of turbine control systems. As now a legacy series, this board no longer receives support from General Electric. It has become increasingly difficult to locate, but AX Control does attempt to keep it in stock as a refurbished or new surplus part. Please contact us directly for its availability, pricing, and shipping options.
The DS200TCSAG1A is also known as a Fuel Skid Interface Board (TCSA). This board has the ability to provide a connection to the XCSA board within a fuel skid that can be used with Dry Low Emissions (DLE) functions. The TCSA can use the P3 connector to read signals that come to it from the XDSA board that are from the TB3 terminal board within the <R2> core. It also has the ability to decipher signals that it detects from transducers that are located on the UCIA board. It also has the ability to provide power to those pressure transducers. There are RS-422 signals that the TCSA can translate for the UCIA board and send to the 196 processor. Once it is installed, there is no software, hardware, or jumpers that need to be configured for this board to work properly.
The DS200TCSAG1A also should be mounted on the back panel of a Mark V LM hardware cabinet. This card goes in the controller section of the cabinet. It takes up one of the six slots. The other slots are normally taken up by a UCIA, UCPB, or a TCPS board. There are two open slots on this setup.