DS200SLCCG4A

Product Description

The DS200SLCCG4A board was developed by General Electric as a local area network (LAN) communication board. This device belongs to the Mark V series of replacement drive and exciter boards. A number of drives from the GE brand are designed to accept this card in its cabinet. Installing the card provides integral processing space for communications signals sent to the drive.

All signals sent to the DS200SLCCG4A board are processed with the integrated LAN control processor (LCP). Programming data for this microprocessor is stored in two EPROM memory cartridges attached to the board. The LCP is also provided with interfacing space to communicate with the host’s drive control card. This is in the form of a dual ported RAM found on board. Circuits on the board include isolated and nonisolated, allowing for various signals. Users are provided with access to system diagnostics via the attachable alphanumeric keypad. This programming accessory easily attaches to the board.

Any product purchased from AX Control will be shipped in a static resistant plastic bag. Do not remove the DS200SLCCG4A board until all provided installation parameters have been thoroughly reviewed. Installation should only be performed by personnel trained to handle drive boards. Instructions on wiring the LAN communication board can be found in the device’s corresponding manual and datasheet. The manufacturer, General Electric, originally provided technical support to this unit.

AX Control’s knowledgeable sales team is happy to help with all of your automation needs. Please contact our staff to receive current prices on this and all other parts and repairs.