About the DS200SLCCG1AFG
The DS200SLCCG1AFG replacement LAN Communication board is only one version of many available within AX Control’s inventory. This board is designed for use with GE’s Mark V turbine control systems, designed to control and manage industrial gas and steam turbine systems. The MK V Control system can be set up as either a Simplex or TMR (triple modular redundant) system. While this DS200SLCCG1AFG product's greater Mark V Turbine Control System Series has fitting greater applications in newer alternative-energy focused settings, it is something of a dinosaur as well; existing as a now-obsolete legacy product series that was discontinued in one of the many years following its initial General Electric release. This DS200SLCCG1AFG Device is not the originally-manufactured Board of its intended functional role; that would be the DS200SLCCG1 parent LAN Communication Card missing this DS200SLCCG1AFG PCB's three significant product revisions.
Hardware Tips and Specifications
It is important that customers know DS200SLCC boards typically do not include software located within the U6 and U7 EPROMs, as the board is shipped with these sockets empty. If you are not planning on removing EPROMs from your old board to move to your new board, please order a replacement board with the EPROMs in place (DS215 level.) The DS200SLCCG1AFG board mounts to standoffs located on the SDCC board and interfaces with the keyboard located on this card via the KPPL connector. Generally, voltage suppression and limitation in the normal assembly of this DS200SLCCG1AFG product offering is handled as it would be by any Mark V Turbine Control System Series product; through its internal assembly's acceptance of a Mark V Series-standardized selection of hardware components including various capacitors, resistors, transistors, and integrated circuits. On top of this, this DS200SLCCG1AFG LAN Communications Card should receive some additional layer of protection from its normal style of PCB coating, which envelops and protects individual DS200SLCCG1AFG Board hardware components in a thick rudimentary daily wear and tear protective layer based on their GE-percieved functional priority. This DS200SLCCG1AFG printed circuit board product offering's unique normal-style PCB coating was discovered upon analysis of the DS200SLCCG1AFG functional product number, which breaks down many of this DS200SLCCG1AFG devices hardware components and component specifications in a series of functional naming chunks. Some of the other hardware details revealed through the DS200SLCCG1AFG functional product number include this DS200SLCCG1AFG PCB's:
- Normal Mark V Series assembly version
- Domestic original manufacture location
- SLCC functional product abbreviation
- Group one Mark V Series product grouping
- A-rated primary functional revision
- F-rated secondary functional revision
- G-rated artwork configuration revision
The DS200SLCCG1AFG has a 16-position alphanumeric display located parallel to one edge. There are four posts located close to the end of this display (ST1 through ST4) that are used to protect its glass tip. These posts look like jumpers but should not be confused with the jumpers located elsewhere on the board. Jumper settings can be modified to change RS-422 DLAN drivers or to isolate the DLAN circuit. Additionally, the J19 jumper is used to connect the crystal to the processor. Additional jumper settings can be found in tables located within associated manuals and user guides. AX Control ships products as quickly as possible, usually the day we receive your purchase order. Local customers are welcome to arrange for private courier service pickup at our facility.
