Product Description
The DS200SLCCG1ABB GE printed circuit board is a Mark V replacement card that functions as a LAN Communications board. This DS200SLCCG1ABB PCB is one of several LAN Communication Card versions available within our inventory; this particular PCB is edited through its inclusion of an A-rated functional revision, a B-rated functional revision, and a B-rated artwork configuration revision. We suggest ordering an exact replacement for your current LAN Communications board, that matches every digit in the DS200SLCCG1ABB product number. Also, please be aware that DS200 boards like this one typically ship without EPROMs in the U6 and U7 sockets; these are the replaceable EPROMS that can be moved from one board to another. If you need these configurable EPROMs with the LCP software, please order a 215 level board, which would be indicated by the replacement of the DS200 series tag by the DS215 series tag at the very beginning of this DS200SLCCG1ABB functional part number.
Hardware Tips and Specifications
As with any General Electric printed circuit board, Mark V Series or otherwise, this DS200SLCCG1ABB LAN Communications Card makes use of its own individual series of hardware components and component specifications, in order to achieve its intended functionality. The DS200SLCCG1ABB board interfaces with other controller boards using multiple connectors, including the KPPL connector to provide I/O between the programmer module keypad and the SLCC. Other interfaces in the assembly of this DS200SLCCG1ABB LAN Communications Card connect to the simple drive terminal board, the supply interface board, the drive control card, or drive DLAN and ARCNET signals within the Mark V Series automated drive assembly. The DS200SLCCG1ABB board has several integrated circuits including a microprocessor, dedicated RAM, and dual-ported RAM; numerous other voltage-limiting hardware components are also put to work in this DS200SLCCG1ABB Mark V Series printed circuit board's assembly.
The DS200SLCCG1ABB board also has a sixteen-digit alphanumeric display located within the body of the board, as well as a number of jumpers (both wire jumpers and berg-type jumpers.) Other components made useful to this General Electric PCB product include resistor network arrays, resistors, capacitors, and diodes. All of the aforementioned hardware components in the assembly of this DS200SLCCG1ABB printed circuit board should be well-protected by a rudimentary layer of normal-style printed circuit board protection, which was discovered upon a basic breakdown of the DS200SLCCG1ABB functional product number.Additional information regarding the proper handling, installation, and board settings can be found through associated GE manuals and user guides. Please refer to these for specifics regarding any special handling procedures or hazards associated with the board.
