Product Description
The DS200SHVMG1ACD is a high voltage M-frame interface board. Since it was developed for the General Electric Mark V board series, this card can be used across a wide range of GE brand exciters and drives. Interfacing between the M-frame drive’s SCR bridge and the DCFB/SDCI power supply board and the PCCA power connect card is provided with this board.
DS200SHVMG1ACD provides an array of drive functions to the drive when installed. The board works to convert shunt signals (between -500 and 500 mV) into differential frequency outputs (0 to 500 kHz). The conversion of the shunt signals into frequencies occurs in the positive and negative DC voltage controlled oscillator (VCO) circuits. When the conversions are complete, the frequency signals are then sent to either the DCFB or SDCI board or the PCCA card. A 10:1 current transformer attenuation is is available for the AC line currents. The board can accommodate most attenuation requirements using the 17 integrated configurable jumpers.
Be sure to meet all manufacturer provided installation parameters for both DS200SHVMG1ACD and the installed drive. These will promote proper drive and system function. To review step-by-step instructions on wiring and installing the board, please refer to the device’s datasheet and manual. The manufacturer, General Electric, was the original provider of technical support for the entire Mark V series, including DS200SHVMG1ACD.
AX Control’s knowledgeable sales staff is happy to assist with all of your DS200SHVMG1ACD needs. Current prices on this and other parts and repairs is available by calling or emailing a member of our sales team.