About the DS200SHVIG1
Installing this card provides the drive’s SCR bridge and the power supply with an interface point for signal communication. This DS200SHVIG1 Board's specific functional role is introduced by its normal Mark V Series assembly's adoption of a specific series of hardware components and component specifications. The PCCA (power connect card), the power supply, and instrumentation card can all use this interfacing board.
When installed, DS200SHVIG1 provides a medium for critical voltage signals to be sent to the rest of the drive. Inputted signals ranging from -500 mV to 500 mV are converted by this card into differential frequency outputs ranging from 0 to 500 kHz. Converted frequencies are then sent to the power supply card found within the drive. Seventeen configurable jumpers featuring 10:1 current transformers are integrated on to the DS200SHVIG1 board. These jumpers provide extra attenuation capabilities for both line and bridge voltages. Should any filter fuses blow, three indicator LEDs found on the board will alert users to this error.
DS200SHVIG1 Product Number
The DS200SHVIG1 functional product number itself can be considered a primary source of DS200SHVIG1 board hardware component and component specification information, coding for these specific details in a series of consecutive functional naming chunks. For example, the DS200SHVIG1 functional product number begins with the DS200 series tag delegating this DS200SHVIG1 PCB's normal Mark V Series assembly and its domestic location of original manufacture. Some of the other relevant hardware details revealed through a functional product number include this DS200SHVIG1 PCB's:
- SHVI functional product abbreviation
- Group one Mark V Series product grouping
- Normal style of PCB protective coating
- Absence of any functionality or artwork-altering product revisions
This DS200SHVIG1 printed circuit board's SHVI functional product abbreviation was developed specifically to exist as a convenient conversational or promotional shorthand alternative to the DS200SHVIG1 lengthy product number itself. When installing this DS200SHVIG1 board in its greater Mark V Series automated drive assembly, be sure to follow all manufacturer provided installation parameters. These ensure that both the board and the drive operate as intended. Correctly wiring DS200SHVIG1 is necessary to promoting proper drive function. Each of the four corners to this DS200SHVIG1 product offering's base circuit board has been factory-drilled to support convenient and safe DS200SHVIG1 Board installation in the aforementioned greater Mark V Series automated drive assembly.
