Product Description
DS200RTBAG3A is a Mark V series relay terminal board developed by General Electric. This DS200RTBAG3A printed circuit board's status a Relay Terminal Board is backed by this functional description's appearance in relevant General Electric instructional manual materials, as well as through the inclusion of the RTBA functional acronym in the DS200RTBAG3A alphanumeric product number. This DS200RTBAG3A printed circuit board or PCB for short is not the original Relay Terminal Board that was manufactured for the Mark V Turbine Control System Series, although it does feature the normal Mark V Series assembly style utilized by the original product. The original Relay Terminal Board created and produced for the Mark V Series is the DS200RTBAG3 parent printed circuit board, which is notably missing this DS200RTBAG3A product offering's singular A-graded functional product revision.
Hardware Tips and Specifications
This DS200RTBAG3A Relay Terminal Board or Relay Terminal Board assembly includes both a number of product-specific and Mark V Series-streamlined hardware components to reach its original intended functional status within the greater Mark V Series and Mark V Series automated drive assembly. Installed hosts are provided with an additional ten relay points when using this board. A number of GE brand exciters and drives can have this card installed into their operating cabinets. The relays can be driven remotely by the user or by the onboard LAN I/O terminal control board. On this board, the ten relays are comprised of two different types. Seven of the relays are DPDT type found in locations K20 through K26. Individually, DPDT relays each include two Form C contacts in the assembly of this DS200RTBAG3A Relay Terminal Board. Each contact on these types of relays rate at 10A, while the other three relays in positions K27 through K29 are 4PDT type. These relays types include four Form C contacts, with contacts within these rate at 1A each. I/O for all relays is protected by a 130 VAC MOV (metal oxide varistor), and each relay also contains a 110 VDC coil to ensure proper board function. Should any relay fail, users can quickly and easily remove and replace any relay found on DS200RTBAG3A.
Both the board and the drive are provided a set of installation parameters determined by the manufacturer. Following these will ensure that the board and its installed drive operate as expected. To review a complete wiring guide for DS200RTBAG3A, please refer to either the series manual or the device datasheet. The Mark V series of optional and replacement boards was originally provided with technical service by the manufacturer, General Electric. Our trusted sales team at AX Control is happy to assist with all of your DS200RTBAG3A needs. Current prices and availability can be obtained by emailing or calling our office.
