Product Description
The DS200PTBAG1BBA is a Mark V board component. The Mark V is one of several Speedtronic turbine control systems with replacement parts available from AX Control. This system was developed and sold by General Electric for the control of industrial turbine control systems.
The DS200PTBAG1BBA is a multi-input and output termination board. The board is significantly longer than it is wide, and is built with multiple input and output connectors. This includes four vertical pin header connectors, vertical pin connectors, a termination board with six screw connections, and a double termination board (green). These screw connectors are numbered from one to 79. The board also has metal oxide varistors, capacitors, resistors, and jumper switches. Factory drill holes are located in each corner of the board. Two of these holes are ringed with a conductive material.
Additionally, the board is marked with the board ID number, coding to help with wiring and location, as well as codes to help with connections to other boards within the system. It also carries the GE logo.
The board weighs approximately 1.0 pounds before the addition of internal and external boxing used for shipping. We also use static-reducing wrapping to protect static-sensitive products from any damage during transit.
The DS200PTBAG1BBA typically acts as a termination board for the independent protective module core, offering overspeed protection and flame detection.
For additional information about the DS200PTBAG1BBA, please refer to original documentation from General Electric like manuals, user guides, and data sheets. These documents will help guide you through installation and maintenance procedures.