Product Description
The DS200PLFMG1AAA from General Electric is a Mark V turbine control replacement component, designed to function specifically as a Phase Logic Fault board. This is only one version of this board available at AX Control, so please be sure you are ordering the correct version (typically an exact replica) of the board for your application. PLFM boards are typically used within EX2000 control systems, although it is attributable as a Mark V Series product. The DS200PLFMG1AAA board is used to indicate hardware fault status within the larger system. As the control loop goes through individual steps it must start each phase according to pre-defined programming instructions. This card helps users know if something has occurred to put those steps out of order or in jeopardy.
Hardware Tips and Specifications
The DS200PLFMG1AAA Phase Logic Fault Module is designed with four distinct parts. The bottom part of the board is populated with three integrated circuits, eight resistor network arrays, several capacitors, a vertical pin connector, and a green LED power indicator. This area also includes the GE logo, and nearby the board is marked with its identification number and several codes. Above this area, the board has three other parts that are each marked off with a white rectangle; each labeled Phase A, Phase B, or Phase C. Beyond the difference in this top labeling, the sections are visually identical. Each section includes two lines of three red LEDs, with each LED individually labeled. At the top of these three boxes, the card is labeled “H/W Fault status.” All of the prior information on this page has been sourced through the use of a visual inspection, as this DS200PLFMG1AAA Phase Logic Fault Module does not offer many pertinent instructional manual materials on the internet for consumption. While this is true, the DS200PLFMG1AAA product number itself is a handy source of DS200PLFMG1AAA-pertinent information; starting with the DS200 series tag. This series tag designates the DS200PLFMG1AAA Phase Logic Fault Module as a domestically-manufactured General Electric product with a normal assembly type. Some other information collectible from the DS200PLFMG1AAA functional product number includes:
- The PLFM functional acronym
- The group one Mark V Series grouping
- A normal style of printed circuit board coating
- Three A-rated significant product revisions
