DS200LUVAG1A

Product Description

The DS200LUVAG1A is one of several GE Module Genius Controllers that are within AX Control’s on-hand inventory.   The Mark V system is one of GE’s Speedtronic turbine control systems.  It can be used for either Simplex or triple modular redundant systems.   

The DS200LUVAG1A is a narrow rectangular circuit board that is factory drilled along its edge near but not at each corner.   The board is also drilled at the center point of both long edges.  The edges of the board have small portions removed. 

Components on the DS200LUVAG1A include resistor network arrays, integrated circuits, field-programmable gate arrays, and capacitors. The board also has six jumper switches.  Five of these jumpers are placed along one board edge, sit horizontally, and extend out from the top of the board.  There is a horizontal pin connector next to these jumper switches.  The sixth jumper is placed within the body of the board and is placed vertically on the board’s surface. 

The DS200LUVAG1A circuit board is marked with codes that will help identify how to wire and install the board.  The board also carries the board identification code and the GE logo. 

More information about the board and its proper installation can be sourced through original documentation like GE manuals and user guides.  If you no longer have these documents we may be able to help. 

AX Control is located in central North Carolina.  If you are local to us feel free to arrange for pickup at our warehouse.  Most orders can be ready in a few hours.