Product Description
DS200LRPAG1AGF EX2000 Line Protection Card Mark V
The DS200LRPAG1AGF is a GE board component that is designed for use in the Mark V series of turbine control. The MKV was a later Speedtronic gas and steam turbine management system that could be used in either TMR or Simplex form depending on the complexity and needs of the end user. The DS200LRPAG1AGF is typically used with the EX2000 interface. Please note that DS200 series boards do not offer any type of updates to components or firmware; if these are necessary, please refer to similar boards on our website listed in the DS215 series, such as the DS215215LRPAG1AZZ01A.
The DS200LRPAG1AGF functions as a Line Protection Card. The board is heavily marked with reference designators and alignment marks and includes several factory made drill holes, including one in the center of each edge and one per board corner. These drill holes allow mounting hardware to be added to the board, including standoffs and screws. The board has several connectors for the transmission of data, including terminal strips, stab-on connectors, and a female vertical cable connector.
Other board components on the DS200LRPAG1AGF include multiple jumper switches to customize board operation, integrated circuits like FPGA (field programmable gate arrays) and oscillating chips, potentiometers, resistors, resistor network arrays, heat sinks with attached transistors, capacitors, including surface-mounted high-voltage electrolytic capacitors, LED indicators, a reset switch, relays, and diodes.
Refer to data sheets, user guides, or product manuals for additional details regarding installation, maintenance or proper handling of the DS200LRPAG1AGF.