DS200LDCCH1AKA

Product Description

General Electric developed the DS200LDCCH1AKA board to operate as a drive control and local area network (LAN) communication board. The card was developed by General Electric for their Mark V series of drive boards. Exciters and drives across GE’s DIRECTO-MATIC 2000 series can have this card installed in its cabinet. An array of onboard microprocessors provide the drive with a number of interfacing capabilities. These include LAN communications, drive resets, motor and drive processing, and operator interface.

Coverage of I/O and drive control settings is provided by the four microprocessors integrated onto the board. One of the onboard processors is a LAN control processor (LCP). The LCP is responsible for accepting and converting five different bus systems fed to the drive. DS200LDCCH1AKA also includes a drive control processor (DCP) used for controlling peripheral I/O devices such as timers and encoders. A motor control processors (MCP) is available on the drive to process I/O communications as well as circuits for the motor control system. Should the processing power of the MCP not meet a job’s need, the co-motor processor (CMP) will provide the extra processing power required. Users can easily access any onboard system diagnostics and settings via the attached alphanumeric keypad.

Devices shipped by AX Control are enclosed in a protective and static resistant plastic bag. Review any provided installation parameters before removing the device from it’s shipping container. For a complete guide to wiring and installing the DS200LDCCH1AKA LAN communications board, refer to the corresponding series manual and datasheet. Technical support for this device was originally provided by General Electric, the device’s manufacturer.

AX Control’s helpful and knowledgeable sales staff is available to assist with all of your automation needs. Our team can provide you with all information and pricing for the DS200LDCCH1AKA card as well as any other needed part or repair.