DS200LDCCH1AGA

    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 4.94 (18)
  • Click a star to rate this product
    Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures Varying star amount pictures
  • 4.94 (18)
  • Click a star to rate this product
This DS200LDCCH1AGA Drive Control/LAN Communications Board was manufactured for General Electric's Mark V Turbine Control System Series.

AVAILABILITY:

IN STOCK
SHIPS IN 3-5 DAYS

Sell Surplus: Have a DS200LDCCH1AGA to sell? Sell Now
Exchange Credit: Learn more about our exchange credit program
  • Part Number: DS200LDCCH1AGA
  • SKU: GBTC-11407
  • Manufacturer: GE Boards & Turbine Control
  • Series: Mark V DS200

DS200LDCCH1AGA Technical Specifications

Part Number DS200LDCCH1AGA
Series Mark V
Manufacturer GE General Electric
Instruction Manual GEI-100216
Product Type Drive Control/LAN Communications Board
Functional Acronym/Abbreviation LDCC
Number of Jumpers 14
Weight Approx 2 lbs

About the DS200LDCCH1AGA

  • The DS200LDCCH1AGA is a drive control and local area network (LAN) communications board developed by General Electric.
  • It's part of the Mark V series of replacement drive boards, compatible with GE's DIRECTO-MATIC 2000 drives and exciters.
  • When installed, it provides various drive and I/O control functions.
  • The Mark V Turbine Control System Series is a legacy GE product series, with its manufacture discontinued.
  • However, the Mark V Series is also one of the final GE Mark series to use the patented Speedtronic control system technology, first released with the Mark I Series in the late 1960s.
  • The DS200LDCCH1AGA is not the original product for its specific functionality; that would be the DS200LDCCH1 parent PCB, which lacks the DS200LDCCH1AGA's three significant product revisions.

Hardware Tips and Specifications
  • The DS200LDCCH1AGA communications card houses four microprocessors onboard:
    • LAN Control Processor (LCP): Accepts five different bus types.
    • Drive Control Processor (DCP): Processes analog and digital I/O conversions, controls peripheral I/O devices (like encoders and timers).
    • Motor Control Processor (MCP): Processes digital I/O.
    • Co-Motor Processor (CMP): Provides additional processing power for complex calculations when needed.
  • The board is completed with an alphanumeric keyboard for system programming and diagnostics.
  • Six flash PROMs store the device's configuration data; they are factory-programmed but can be reprogrammed in the field.
  • A RESET button is included for diagnosis and adaptation to functional fault conditions.
  • The EEPROM U9 is a field-adjustable parameter, programmed to download drive configuration values for the LDCC unit's proper operation. Its firmware can be transferred by moving U9 from another drive control board.

Shipping, Installation, and Support
  • When shipped from AX Control, the DS200LDCCH1AGA board will be wrapped in a protective, static-resistant plastic bag.
  • Before removing the device, review the installation parameters provided by the manufacturer.
  • A complete wiring guide is available in the series manual and the board’s corresponding datasheet.
  • All members of the Mark V series were originally provided with technical support by General Electric.

Frequently Asked Questions about DS200LDCCH1AGA

What type of drives does DS200LDCCH1AGA provide to?
DS200LDCCH1AGA provides primary drive and I/O control functions to General Electric's Directo-Matic 2000 drives and exciters.

What are some of the test points and their definitions on the DS200LDCCH1AGA model?

Some of the test points on this model are P5, DCOM1/DCOM2, and FCLK. The P5 test point is used to help regulate the 5-volt power supply. Test points DCOM1/DCOM2 will control the 0-volt common reference point used for all test signals. The FCLK test point indicates that the unit is alive, and the 8 MHz output is coming from the oscillator output from the motor controller processor as needed. For all of the other test points, refer to Table 1 on page five of the LDCC manual.
Which manual should I use with DS200LDCCH1AGA?
With DS200LDCCH1AGA, use Manual GEI-100216. This manual for DS200LDCCH1AGA is the GE Motors and Industrial Systems Drive Control/LAN Communications Board Manual. Although this is not a thorough installation, operation, and maintenance manual for DS200LDCCH1AGA, this manual will help you with understanding the DS200LDCCH1AGA.

Reviews For DS200LDCCH1AGA

Internal Review
(5.0)

The DS200LDCCH1AGA model has two LED indicators for the display of the drives fault codes for the DN1 bar graph and Programmer digital display LEDs. Faults one through three-hundred and thirty-nine have a slow blink rate with a BCD pattern. For more information on the blink patterns for the other LEDs refer to the GEI-100216 manual. This DS200LDCCH1AGA product's three revisions cannot be considered backwards-compatible, as two different styles of revision have been made to the assembly of this DS200LDCCH1AGA device. - AX Control Lead Technician

Repair Services For DS200LDCCH1AGA

Type Lead Time Price Action
Repair Service 1-2 weeks $920

Our highly skilled technicians can repair your DS200LDCCH1AGA. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:

  • 48-72hr Rush Repair
  • Detailed Repair Reports
  • AX Control Certificate of Warranty

AX Control Warranty Info

All products we sell are backed by our unparalleled warranty. A warranty certificate will be provided with your order upon request.
All PLCs, HMIs, and Turbine Control Boards: 3 Years
All AC/DC and Servo Drives: 2 Years
All Motors: 1 Year
Learn More