About the DS200DACAG1
The DS200DACAG1 is an AC/DC converter board used in GE Speedtronic systems. This board is most often used within the GE EX2100 Exciter/Excitation Control module that provides field excitation current to control the steam/gas/hydro generator’s AC terminal voltage and their reactive volt-amperes. This is a modular system that can be designed as a simplex or redundant control unit. It supports Ethernet LAN communication with other GE equipment including the Control System Toolbox, the OEM operator interface, and the LCI Static Starter. The DS200DACAG1 is no longer manufactured by GE but is available from AX Control as a reconditioned unit or as liquidated never-used surplus stock.
This DS200DACAG1 printed circuit board product offering's TC/DC AC/DC Converter Board official functional product description is not available in any originally-printed General Electric instructional manual materials available online.
DS200DACAG1 Part Number and Voltages
With this being true, this DS200DACAG1 PCB's TC/DC AC/DC Converter Board functional description was revealed through use of the functional DS200DACAG1 product number, which makes an inclusion of the DACA functional product abbreviation seen in other styles of TC/DC AC/DC Converter Boards available here at AX. The DACA functional product number in this DS200DACAG1 PCB's DS200DACAG1 functional product number is but one of many functional naming components available for analysis. Some of this DS200DACAG1 printed circuit board's other hardware details revealed through the DS200DACAG1 functional product number include:
- A normal Mark V Series assembly version
- A domestic original manufacture location
- A group one Mark V Series product grouping
- A lack of any viable product revision
The DS200DACAG1 functions as an AC to DC converter. This is one of several power supply boards within the EX2100. The DS200DACAG1 board is powered by a 115 VAC source which is then converted by the board to produce a 125 VDC output. The circuit board and its battery source also provide a redundant 125 VDC supply for the EPDM circuit board. Two DS200DACAG1 boards can be connected to the EPDM for redundancy backup. For a more detailed description of the DS200DACAG1, please refer to publications from GE like data sheets, product manuals, and user guides. These will give information regarding handling instructions and warnings, and step-by-step installation procedures.
