DS3820EPSA1A1A

Product Description

The DS3820EPSA1A1A is a smaller circuit board featured in General Electric’s Speedtronic Mark IV Turbine series. The gas and steam turbines are a fast way to provide energy and flexible fuel. A gas turbine builds pressure by using a combination of air and fuel in an internal combustion engine to create a mixture of gases to turn the turbine blades. A steam turbine uses a large boiler which is filled with water. The boiler is then heated to create large amounts of steam which then turns the turbine's blades. The energy produced by the spinning turbine blades is then harnessed for other purposes. The DS3820EPSA1A1A is easy to install with four slide in screw ports. The DS3820EPSA1A1A has three large glass fuses. The DS3820EPSA1A1A has two large grey rectangular resistors with the power resistance ability marked on the face. The DS3820EPSA1A1A has three small traditional resistors that use a color code to decipher the power resistance. The DS3820EPSA1A1A has four small yellow capacitors and three medium yellow capacitors. Capacitors are used to create an electrical field to store extra energy in for later use. The DS3820EPSA1A1A has two red female terminals with two ports, there is also a larger female terminal with five ports. The DS3820EPSA1A1A has a very large black box on one edge of the circuit board. The DS3820EPSA1A1A has six grey diodes, six bright red diodes, and eight black and silver diodes. These types of diodes only allow energy to move in one direction through them. The DS3820EPSA1A1A also has another type of diode called a light emitting diode or LED. The DS3820EPSA1A1A has three amber colored LEDs. A light emitting diode will light up as an energy current passes through them.

** AX Control suggests referring to the original manufacturer's manual for all safety and installation methods. Technical support for the DS3820EPSA1A1A was initially provided by General Electric.