This product was made by General Electric. The DS3800NPSE1C1E is a printed circuit board (PCB). This circuit board was designed as a component in the Mark IV turbine control series. The DS3800NPSE1C1E is what is known as a power supply circuit board.
A variety of capacitors are featured on the DS3800NPSE1C1E. Thirty-seven (37) of these capacitors are mid-sized and yellow. These capacitors are arranged in vertical and horizontal lines. Many smaller capacitors in yellow and silver are also located on the DS3800NPSE1C1E. There are (3) large brown resistors banded in different colors including orange, gold, green, brown, grey and black. Five (5) fuses can be found on the surface of the DS3800NPSE1C1E. One of the fuses is situated on the top of the circuit board. One (1) fuse is located near the middle of the circuit board. The other four (4) fuses are close to the bottom of the DS3800NPSE1C1E. Situated near the bottom of the circuit board is one (1) metal oxide varistor (MOV) which is red. Three (3) potentiometers are lined up close to the top of the DS3800NPSE1C1E. Another term for a potentiometer is variable resistor. The dials on every potentiometer allow a user to change the device’s resistance. Many diodes are lined up near the upper side of the DS3800NPSE1C1E. The diodes are black and grey and medium in size. There are twenty-two (22) small diodes which are grey in color arranged on the left side of the DS3800NPSE1C1E. Five (5) test points are located on the DS3800NPSE1C1E.