General Electric’s Turbine line called Mark IV also referred to as Speedtronic, features the DS3800NISA1C1C. Using a gas turbine is a quick way to provide flexible fuel and energy. A gas turbine builds pressure by using a combination of air and fuel in an internal combustion engine to create a mixture of gases to rotate the turbine. The energy produced by the rotating turbine is then harnessed for other purposes. The DS3800NISA1C1C requires many parts working with one another to function. The parts used on the DS3800NISA1C1C are listed below. The DS3800NISA1C1C has eighteen resistors. The DS3800NISA1C1C has eight pale green LEDs (light emitting diodes). These diodes illuminate as the current passes through them. The DS3800NISA1C1C has three regular sized silver capacitors and three small sized capacitors. The capacitors hold energy in an electric field. The DS3800NISA1C1C has a mixture of nine EEPROM and EPROMs. These devices hold the DS3800NISA1C1C ‘s programming. The EPROMs are able to be updated with new programs, where the EEPROMs cannot. The resistors have colored markings on them to indicate the amount of energy that can pass through them. The DS3800NISA1C1C has eight Jumper Ports. These Jumper Ports come with small sheaths, that when moved around influence the flow of energy throughout the circuit board. The DS3800NISA1C1C has thirty-nine reddish brown diodes, twelve red diodes, sixteen green diodes. The DS3800NISA1C1C has a large female port to attach with its neighboring circuit boards. The DS3800NISA1C1C also has clasps and rivet holes to fasten it in place.
If you’d like more information on this product or a price quote, please call AX Control.