About the DS3800NGRA1B1A
The DS3800NGRA1B1A is a PCB from GE designed as part of the Mark IV system. This series, built on integrated chipsets made with overlapping responsibilities, significantly lowered the percentage of downtime caused by electronics failure. The system can also automate some processes (like startup and shutdown) to increase efficiency.
Hardware Tips and Specifications
The DS3800NGRA1B1A is marked with letters (A through J) and numbers (2 through 80) on two edges. It is marked 6BA04 and NGRA 6DA04, and is marked with the GE stamp. Components on the board are also marked. Each corner has been drilled. The DS3800NGRA1B1A has, in its normal Mark IV Series assembly;
- one Augat connector (28-pin female) placed toward the center of the board
- four PCB right-angled mating connectors (all marked 218A4637) located along the right and left edges
- two of these are P4 connectors and two are P6 connectors
- twenty-five integrated circuits
- rigid terminals
- Quad CMOS analog switches
- monolithic devices which feature fast switching speeds combined with low power dissipation
- voltage comparators
- hex inverters
- precision amplifiers
GE provided all original technical support for the DS3800NGRA1B1A. Publications like manuals are included as part of tech support. Manuals/data sheets are often the best resources for information on installation or maintenance schedules. AX Control’s sales team is happy to speak with you about all of your automation needs. Call, or send us an email about what you’re looking for.