DS3800HVDB1G1D

Product Description

The GE Video Driver Board DS3800HVDB1G1D is designed for quick installation in the drive. The board features a modular connector on 1 end and retention levers on the other end. The GE Video Driver Board DS3800HVDB1G1D also is populated with 1 20-pin connector between the retention levers. The board is also populated with multiple erasable programmable read-only memory (EPROM) modules and 15 jumpers.

Before you begin to replace the GE Video Driver Board DS3800HVDB1G1D, there are some safety considerations. This will help you avoid dangerous situations. Before you begin the replacement, examine the area around the drive and note any wetness on the floor. If the wetness is a result of condensation, consider installing dehumidifiers to dry the air. Dry the floor completely to avoid any hazards that result from electric shock. Look for 2-cord electrical extension cords and if any are present, replace them with 3-wire extension cords. Also, if the floor is covered with oil or grease, use detergents to clean the floor. Be sure the floor is dry before proceeding.

The drive has multiple sources of electric current. Examine the area around the drive and find all the associated emergency shutoff devices.  Make sure they are functional, easy to use, and within easy reach. This is important if an emergency happens and quick action can reduce injury or lessen damage to equipment.

Shut off all the power sources to the drive. This includes all dc power sources and ac power sources. Circuit breakers are available to shut off the ac power sources.