About the DS3800HSCD1J1G
This DS3800HSCD1J1G printed circuit board product offering from General Electric was originally designed and manufactured specifically for the Mark IV Turbine Control System Series, as was revealed before. The Mark IV Series that this DS3800HSCD1J1G device belongs to is rather self-explanatory, given its possible applications in the control and management systems of General Electric-compatible gas and steam turbine automated drive assemblies. Unfortunately, the Mark IV Turbine Control System Series's functional application scope did not yet match that of the coming Mark VI Series, which has alternative energy-focused wind turbine automated drive applications as well. This DS3800HSCD1J1G product's greater Mark IV Series must be considered obsolete generally; just given the fact that its production was ceased by General Electric in the many years beyond its initial rollout due to a manufacturer-identified functional full-series obsolescence. With this being the case, this DS3800HSCD1J1G product's somewhat-outdated Mark IV Series is able to still attract some concerted demand on its greater automated industrial marketplace as it is one of the final-developed GE Mark product series to make use of the patented Speedtronic control system technology first seen with the release of the Mark I Series way back in the later 1960s.
Hardware Tips and Specifications
The GE High Level Non-Isolated Input Board DS3800HSCD1J1G features a modular connector on 1 end and retention levers on the other end. The board is populated with a multiple capacitors. The board is populated with multiple transistor-transistor logic devices. The GE High Level Non-Isolated Input Board DS3800HSCD1J1G is also populated with 16 red indicator LEDs and 1 amber indicator LED. The board also has 1 socket for electrically erasable programmable read-only memory (EEPROM) modules. The board is also populated with 3 trimmer resistors. All of these previously-listed hardware component specifications important to the normative functional status of this DS3800HSCD1J1G product have been sourced from a diligent visual inspection of the DS3800HSCD1J1G circuit board itself. This was deemed as necessary due to the Mark IV Series's obsolete legacy product series status encouraging a concurrent lack of original instructional manual materials online. One other alternative source of this DS3800HSCD1J1G product's hardware information can be found in its DS3800HSCD1J1G functional product number, which was actually specifically designed by the trusted automated industrial retailer to indirectly display a number of relevant DS3800HSCD1J1G Board hardware details in a series of consecutive functional naming components. For example, the DS3800HSCD1J1G functional product number is started with the dual-functional DS3800 series tag indirectly describing this DS3800HSCD1J1G Board's normal Mark IV Series assembly version as well as its domestic location of original General Electric manufacture. Some of the other hardware details in the DS3800HSCD1J1G functional product number include this HSCD PCB's:
- HSCD functional product abbreviation
- Group one Mark IV Series product grouping
For the GE High Level Non-Isolated Input Board DS3800HSCD1J1G to function properly, it must be installed in the rack so that the board can receive current to power the board through the modular connector. It must also be connected so that it can send and receive control signals. The current and the control signals are carried over the modular connector which is located on the board. Another modular connector is located in the board rack. The modular connectors meet to make the physical connections. The retention levers on the board secure the board and ensure the modular connectors remain attached. To secure the board, hold the board by the retention levers in the open position and slid it into the rack. Keep the board from hitting against other components in the drive. This might knock components off the board or damage components. It might disconnect components and cables. When the board is in the rack, press down on the levers. At the same time this action presses the modular connectors together and mates them together. Ships with a guaranteed warranty applied at our North Carolina warehouse and repair hub location.
