The DS3800HRRB is a relay output board by GE (General Electric). This board is included in the Speedtronic Mark IV series. The DS3800HRRB has nineteen blue diodes. There are around thirty orange colored diodes. The DS3800HRRB has a mix of sixteen EPROM and EEPROMS. The EPROMs are reprogrammable integrated circuits, where EEPROMs are integrated circuits that can only be programmed once. There are eight silver rectangles that are known as crystal oscillators. The crystal oscillators create an electrical signal with a precise frequency. There are seven metal dividers spread out on the DS3800HRRB. There is a female port on one side and a male port on the opposite side. There are nine black transistors. The transistors are small and circular. Transistors are semiconductive and capable of amplifying or switching electronic signals or an electrical current. Transistors can be identified by the three prongs that attach it to the board. The DS3800HRRB has over sixty-five regulators. Each regulator has a corresponding code for the amount of energy it can withstand at one time. The DS3800HRRB has two anchor spots and two clasps to secure the board in place with your existing setup. The DS3800HRRB has eight white LEDs, one yellow LED, and eight red LEDs. There are four silver diodes. The board features labels on every piece. Each piece has its own outline on the board to show where it should be placed, along with the part number (DS3800HRRB).
AX Control has a variety of products available. Call today for a quote.