The DS3800HRMD1C1B is a circuit board in the Speedtronic Turbine Mark IV series produced by General Electric. This board holds over one-hundred resistors. Resistors are used for many things such as, they reduce how much energy can flow around the board, they can adjust signals, along with several others. There are over forty different diodes of various sizes and colors, such as silver, blue, red, and orange. The DS3800HRMD1C1B also holds over fifteen pairs of metal spines also called Jumper ports. Jumper ports change how energy moves around the circuit board depending on how the port covers are put. The DS3800HRMD1C1B has an assortment of nearly forty-five EEPROMs and EPROMs. These apparatuses contain the programming data for DS3800HRMD1C1B to operate. If the DS3800HRMD1C1B has a need for an alteration, the DS3800HRMD1C1B would be amended using the EPROMs port on the top of the device. If an extra space is required an additional EPROM or EEPROM can be installed, in an area indicated “SPARE”. The DS3800HRMD1C1B has eight capacitors one blue and three small yellow ones, three black, one large yellow one. The DS3800HRMD1C1B has an “ON/ OFF” switch in a small red plastic cover in one of the corners. The DS3800HRMD1C1B has three linking points to join with a bigger circuit board. Two have points (masculine) and the other has terminal ports (feminine). The DS3800HRMD1C1B is simply added to a large circuit board with several screws and a two grey clips.
Ask for your straightforward quote from AX Control today.