DS3800HRCA1D1B

Product Description

The DS3800HRCA1D1B is produced by General Electric (GE), for there Speedtronic Mark IV line. The circuit board has a dark terminal plugin sideways along one edge. This board can be connected to another or be held in place. To mount merely use the clips provided on the board and two tiny screws. There are five bulbs or LEDs on this board one is amber the rest are red. The DS3800HRCA1D1B has two groups of Jumper ports. These ports have small caps that can be moved or removed to change the currents flow across the board. There is a variation of diodes on this board of diverse colors and sizes. There is one tiny black diode, nineteen amber diodes, two silver diodes, three cobalt diodes. There are also five amber capacitors and nearly fifteen resistors. The capacitors can stock energy while the resistors help transportation it. Each resistor is only qualified to handling so much at one time. The volume can be figured out with the colored mark each resistor has. There are approximately thirty-five EPROM (data card that can be reprogrammed) and four EEPROM (data card that cannot be changed). There is a small elevated black section where another EEPROM or EPROM may be connected if necessary along with a small section labeled “SPARE”. All of the boards' identification marks are help on with a silkscreen.

AX Control’s caring staff is prepared to answer any question you may have. Allow AX Control to help you the correct part you’re searching for.