The DS3800DSWB1A1A is featured in Mark IV Speedtronic produced by General Electric. The DS3800DSWB1A1A is a larger circuit board. The DS3800DSWB1A1A has a large female terminal port and two grey clips that are used to attach the DS3800DSWB1A1A to other circuit boards and secure it in place. The DS3800DSWB1A1A has around one-hundred resistors that are used to restrict energy flow through the energy board. The resistors are identifiable by the multiple colored rings around the outside. The DS3800DSWB1A1A has a mixture of sixteen integrated circuits. The integrated circuits are split into two separate groups called EPROM and EEPROMs. The EPROM and EEPROMs are very similar in the way they both hold the data to DS3800DSWB1A1A to function. The Eprom is a reprogrammable integrated circuit that can be updated as new programming becomes available. The EEPROMs is not reprogrammable but does come pre-programmed. The DS3800DSWB1A1A three thin yellow capacitors and five yellow capacitors. The capacitors create an electrical field that stores extra energy in the electrical field for later use. The DS3800DSWB1A1A has two silver circular transistors, three small black transistors which are used to amplify or change electronic signals and electoral power. The DS3800DSWB1A1A has six large black diodes, five light blue diodes, three large silver diodes, around forty clear diodes, and eight dark red diodes. The diodes are used to have the energy flow in one direction. The DS3800DSWB1A1A also has one amber colored LED and ten red LEDs. The LEDs or also referred to as light emitting diodes. These LEDs illuminate as energy flows through them.
If you would like a quote or any additional information, please contact the professional staff at AX Control.