DS3800DGRC1C1D

Product Description

The DS3800DGRC1C1D is a generator regulator circuit board. The regulator circuit board was produced by General Electric for the Speedtronic Mark IV series of turbine controls.

The DS3800DGRC1C1D has 34 square gold capacitors scattered around one half of the board. There are two yellow battery-shaped capacitors--one capacitor is larger and one is smaller. The circuit board has two black connector ports. The smaller of these connector ports is labeled 87936-3 218A4637P4. On the regulator circuit board is one black switch and one red switch. There are multiple jumper pins with blue jumpers. The jumpers allow the operator to alter the functions of the board. On the board are many small multicolored striped resistors and diodes. There are also several larger solid grey and dark red resistors. The DS3800DGRC1C1D regulator circuit board is labeled with the letters A through J on one of the longer edges of the rectangular board.

The DS3800DGRC1C1D is a voltage regulator circuit board. A voltage regulator is often used when an operator needs to regulate the voltage levels in a system. A voltage regulator is preferred when consistent and reliable voltage is necessary for operation. The voltage regulator generates a fixed output voltage that stays constant for all changes in input voltage or load conditions. The voltage regulator also acts as a buffer to protect the components from damage.

The DS3800DGRC1C1D will be shipped in a static bag, discharging any static energy prior to handling for user safety. All troubleshooting and technical support should be provided by General Electric.