DS3800DGPA circuit board is a gas generator turbine circuit card produced by GE (General Electric) for the Speedtronic series. This card was made as part of the Mark IV turbine control system by Speedtronic.
The DS3800DGPA is a daughter board, or a small circuit board attached a bigger circuit board, extending the circuitry of a bigger circuit board. The bigger circuit board can be the system’s main circuit board, or motherboard, or it may be a bigger auxiliary board.
The rectangular green board has three (3) openings for cylinder-shaped capacitors which are labeled as C1 to C3. The board has twenty-six (26) small gold-colored square capacitors. On the board are six (6) rectangular blue and grey resistors labeled as RI to R6 along the right side of the circuit card. The circuit card contains ten (10) open places for small cylinder-shaped resistors labeled as R12 to R21. This circuit board also contains twenty-nine (29) gold-colored jumper pins which are all labeled as one (1) to twenty-nine (29) along the left side of the circuit card. These jumper pins enable the operator to change the card and to reconfigure its functions whenever needed. DCPA 6DA02 is written on the bottom side of the card. Also written on the card is its number, DS3800DGPA 6BA02 on the right side of the board.
AX Control will send the DS3800DGPA daughter board in a static bag, which gets rid of any energy accumulated during shipping to ensure user safety. All technical assistance for the circuit board must be provided by GE, the original manufacturer.