The IC3603A177CH2 is a relay created by General Electric for the Mark I and Mark II series. A relay is an electrical device, typically incorporating an electromagnet, that is activated by a current or signal in one circuit to open or close another circuit. Relays are used where it is necessary to control a circuit by a separate low power signal, or where several circuits must be controlled by one signal. The IC3603A177CH2 is a grey rectangular box with fourteen silver flathead screws. Each screw is separated by a grey divider and is indented to fit the screw along with a metal eye ring underneath the screw. The screw ports are used to attach wires to connect which circuits the relay needs to control. The IC3603A177CH2 has a faceplate that has the screw ports numbers, the part number (IC3603A177CH2), and General Electric’s company insignia printed on it. The IC3603A177CH2 has four thin metal tabs with holes in each corner to secure the IC3603A177CH2 into place. The screws are labeled one through fourteen (1-14) and can control up to fourteen circuits. There are two gold screws one on each row to use as grounds. The IC3603A177CH2’s coil voltage is 28 DC.
If you’d like more information or a price quote on the IC3603A177CH2 or any other products, please call the trusted knowledgeable staff at AX Control today.
**General Electric has provided the initial technical support. The staff at AX Control recommends referring to the original manufacturer's manual for safety procedures and instruction on how to install the part.