The IC3600TPSB1B is a component for the Mark I, as well as the Mark II series. The board will fit either of these series. The MKI and MKII were designed by GE to increase the reliability and efficiency of steam and gas turbines by creating a system that could use redundant fail-safes built within the design to minimize downtime, and could maximize efficiency by automating procedures like shutdown and startup using logic controls to sequence those procedures.
The IC3600TPSB1B is empty on roughly fifty percent of the board. It is marked with several codes, including 002/01, ADS, 68A989114, 003/01, 006/01, as well as numbering on one edge. There is a line of metal pins above the numbered edge. The board also carries the ID number for the board, and the USA round GE logo.
The IC3600TPSB1B has two transistors. One of these transistors is an RCA power transistor that is fitted into a heat sink, which allows heat from the component to more quickly dissipate so the component can function well. The transistor is wired to the board from one pole to the board using surfacing wiring. The board uses eight diodes that are located in a single line but are not placed in numerical order. It has four carbon composite resistors of varying size and resistance.
The IC3600TPSB1B will ship from the AX Control warehouse carefully packed and wrapped in a static-reducing material that will protect it during transport. Manuals or data sheets from the manufacturer are excellent resources for safety data; please review this information before unboxing your new part.