About the IC3600TCSA1
Greater Product Series Information
The IC3600TCSA1 is a printed circuit board component for the first two Speedtronic series released for steam/gas heavy-duty turbine management. The Mark I and Mark II used the most up-to-date technology (at time of release) available to create systems that were easy to use, adaptable, long-lasting and scalable to systems as large as full power plants (up to 400 Mw) down to single turbine units.
Hardware Tips and Specifications
The MKI and MKII are no longer supported by GE and have long been considered obsolete due to the development of newer systems within the Speedtronic line. Yet many of these systems continue to be used by all types of facilities. The IC3600TCSA1:
- functions as a Current Sensor card.
- is built with one quick connect screw mount. One screw mount is labeled “A” and the other “B.”
- is marked with “JLS,” with the GE logo, and with the number 68A944660G1.
- does not seem to make use of any relevant Mark I or Mark II Series product revisions.
Components on the IC3600TCSA1 include:
- fifteen resistors of varying size and resistance.
- R3, R4, R8, R9, R13, and R14 appear in a horizontal line below the rest of the components.
- R5, R10, and R15 are all marked with an “X” on both ends.
- The board has twelve diodes.CR9, CR10, CR11 and CR12 appear in a single line and are marked with an “X” on both ends.
The IC3600TCSA1 will be protected by a static-reducing sleeve during shipment. It is recommended that original manufacturer publications like manuals are reviewed for safety data and installation information before your new part is unboxed and installation begins. If you have any questions about our sales or service programs, the team at AX Control is here to help! Please don’t hesitate to contact us directly with any concerns you may have.
