General Electric created the IC3600SVDC1F1C as a component in the Speedtronic Mark I and Mark II series. These were the first series made for the Mark turbine management line. This device is a printed circuit board or PCB.
The IC3600SVDC1F1C printed circuit board or PCB has a metal plate attached to its side. This metal plate features six (6) large components. On the top of the plate, there is a large red LED or light-emitting diode. Below this, there are five (5) large button with various purposes. Three of these buttons are red and two of them are black. The IC3600SVDC1F1C contains many resistors which are light blue and have a pattern of colored bands. These resistors are located all over the printed circuit board. Also scattered throughout the IC3600SVDC1F1C is a series of transistors. While most of these transistors are small, black, and shaped like a half-circle, at least one if larger, silver, and round. Each transistor is labeled with the initial Q. Several capacitors can also be found on the IC3600SVDC1F1C. A few of these capacitors are orange in color and others are smaller and yellow. White and capacitors can also be seen on the IC3600SVDC1F1C. In addition to these rounded capacitors, there are also a few capacitors which are rectangular in shape. These are also solid red. One blue potentiometer, which is also known as a variable resistor, is situated on the IC3600SVDC1F1C near the metal plate. A few MOVs or metal oxide varistors are also featured on the IC3600SVDC1F1C. These components are round and brown or red.