About the IC3600SSVF1
The IC3600SSVF1 is a servo valve feedback card. This is a type of printed circuit board or PCB. The IC3600SSVF1 was developed by General Electric or GE as one part of the Speedtronic Mark I-II series which was made to manage turbines. This IC3600SSVF1 device's Mark I or Mark II Turbine Control System Series that it was originally designed to correspond to has to be highlighted as a General Electric Mark product series rendition that is a legacy product series not in current active production. This IC3600SSVF1 device has not been approved for hazardous locations placement.
Hardware Tips and Specifications
The MKI (Mark I) and MKII (Mark II) are two series in the Mark line by GE. A servo valve is a valve which is electrically operated and controls the flow of fluids. The IC3600SSVF1 contains four (4) red buttons which are positioned on a metal plate on the left edge of the PCB. These components are attached with wires to the printed circuit board. Two (2) blue potentiometers are sitting next to this plate. These potentiometers feature adjustable dials used to change the device’s resistance. They may also be called variable resistors. One (1) small transistor which is circular and made of silver metal can be seen directly in the center of the IC3600SSVF1.
Three (3) integrated circuits sit on the upper half of the IC3600SSVF1. On the right side of the bottom half of the IC3600SSVF1, there are two (2) large inductors. These inductors consist of large coils of wire which are topped with a black plastic cover. The IC3600SSVF1 features six (6) small capacitors which are shaped like rectangles. These capacitors are orange and they are sitting upright on the IC3600SSVF1. One (1) small yellow capacitor which is connected to the PCB by a wire can be found near the top left corner of the IC3600SSVF1. Any resistor, diode, capacitor, integrated circuit, or transistor component available in this IC3600SSVF1 device's normal Mark I or Mark II Turbine Control System Series product assembly as described above was originally designed to exist as part of a larger encompassing voltage suppression and limitation strategy that is adopted to the rest of this IC3600SSVF1 product's Mark I or II Series. This IC3600SSVF1 device is likely the originally-developed product of its specific GE functional role.
