Product Description
The IC3600SSVB1B servo pressure control card was created by General Electric (GE). This part is a PCB or printed circuit board that was made for the Mark I-II series. The Mark I and Mark II are the oldest generations of the Mark line for automating and controlling gas turbine systems. The Mark gas turbine line is created to operate and automate all functions of gas turbines.
Two large resistors are featured on the right of the IC3600SSVB1B. One of the resistors is grey while the other one is black. Four blue potentiometers are located on the opposite end of the IC3600SSVB1B. The potentiometers feature very small dials which allow a user to adjust the device’s resistance level and may also be called variable resistors. Many different components are featured in the middle of the IC3600SSVB1B. There are three large silver transistors located in the center of the IC3600SSVB1B as well as several small black transistors. In the center of the IC3600SSVB1B, there are many resistors that come in various sizes. These have a variety of colored bands. Many capacitors can be seen in the center of the IC3600SSVB1B. Some of them are yellow and orange and some are solid black. Also positioned on the IC3600SSVB1B is a series of diodes which are multi-colored. These diodes are mostly found on the outside borders of the IC3600SSVB1B. A long line of metal prongs is positioned on the right side of the IC3600SSVB1B. The IC3600SSVB1B can be connected to the other components in the Mark series using these prongs.
