About the IC3600SSLD1H1D
The IC3600SSLD1H1D is a printed circuit board made for the Speedtronic Mark I-II series by General Electric (GE). These series were the first in the Mark line which was created to manage gas turbine operations. The Mark systems are in charge of automating processes such as shutdown and startup, fuel and water injection and troubleshooting. Mark systems have been used in industrial turbines successfully for nearly five decades.
Hardware Tips and Specifications
The IC3600SSLD1H1D features a total of eight (8) integrated circuits. Contained on each integrated circuit is a self-contained network of tiny components. One (1) blue potentiometer is featured among these integrated circuits on the upper half of the IC3600SSLD1H1D. Six (6) additional blue potentiometers are grouped together in a line at the lower left side of the IC3600SSLD1H1D. Also known as variable resistors, potentiometers features small knobs which are used to alter the resistance of the device. Three (3) small transistors which are circular and silver can also be found on the lower half of the IC3600SSLD1H1D.
Two groups of resistors which are red and contain colored bands are concentrated at either end of the IC3600SSLD1H1D. Situated among the resistors are several small capacitors. Several of these capacitors are yellow while others may be blue. One (1) silver capacitor can be seen near the top of the IC3600SSLD1H1D. A series of prongs used to connect the IC3600SSLD1H1D with the rest of the system can be found on the right edge of the IC3600SSLD1H1D. The full part number of this product, IC3600SSLD1HD, is listed at the top of the PCB. This IC3600SSLD1H1D product offering's various resistors and capacitors, while certainly important to its central function, do pose something of a snap risk on the surface of this IC3600SSLD1H1D device's base printed circuit board assembly.
