The IC3600SSLD1F1B is a printed circuit board (printed circuit board) manufactured by GE (General Electric). This part is just one of the many components in the Mark I-II turbine series. This series is responsible for regulating turbine processes, automating functions, and ensuring the safety of both equipment and operators. The IC3600SSLD1F1B is what is known as a setpoint card. A setpoint is a desired value of a variable such as temperature or speed.
The IC3600SSLD1F1B contains four (4) variable resistors, also known as potentiometers, at the lower left corner of the IC3600SSLD1F1B. Four (4) additional potentiometers which are black can be found on the same side of the board near the upper left corner. Each of these variable resistors features a small knob which can be used to adjust its resistance. The IC3600SSLD1F1B features eight (8) integrated circuits which are concentrated around the top half of the printed circuit board. On each of these integrated circuits, a network of small components is contained. The IC3600SSLD1F1B also has a series of small transistors which are round and made from silver metal. Scattered around the IC3600SSLD1F1B in various positions is a series of resistors. These resistors feature bands in many different colors which signify each component’s resistance. Several capacitors can be seen on the IC3600SSLD1F1B. At least five of these capacitors are solid yellow. A few other capacitors can be found on the IC3600SSLD1F1B which are solid red. The device’s full part number, IC3600SSLD1F1B, is printed along the top edge of the PCB.