About the IC3600SSFG1
Greater Mark Series Info
The IC3600SSFG1 PCB or printed circuit board is part of the Speedtronic Mark I-II series created by General Electric or GE. The Mark I and Mark II were the earliest generations in the Mark turbine management series.
The Mark systems automate and control all of the functions of gas turbines and have been used all over the world for almost fifty (50) years. These systems were designed to work in any type of gas turbine system across many industries. The IC3600SSFG1 is what is called a solenoid filter board.
Hardware Tips and Specifications
The IC3600SSFG1 features several circuit board components. A series of seven (7) yellow capacitors are featured on the right side of the IC3600SSFG1. Each of these capacitors is labeled with a voltage of 150 volts (150V). These components are identified by the reference designator C, from C1 to C7. A column of resistors is aligned parallel to the capacitors. These resistors:
- are brown
- contain bands which are
- are labeled with the letter R, from R1 to R7
Situated in between these two rows is another row of very small diodes. These diodes are white and black in color. They are labeled with the designator CR, as CR1 to CR7. A series of prongs can be seen to the right of the IC3600SSFG1. These prongs are meant to connect this PCB to other parts in the turbine system. A series of numbers is printed on the right edge of the IC3600SSFG1 next to these prongs. The numbers range from 4 to 48, counting by fours.
