The IC3600SFUC1 is what is called a fuel flow control card. This device was produced by General Electric. The IC3600SFUC1 is a type of printed circuit board or PCB which is a part of the Speedtronic Mark I-II series by GE.
The IC3600SFUC1 is a large rectangular printed circuit board which contains a variety of electronic circuit board components. A long metal plate is situated on the left edge of the IC3600SFUC1. Three (3) large blue potentiometers which are rectangular in shape is placed on the left side of the PCB right next to this plate. These potentiometers, which may also be called variable resistors, are alternated with four (4) large switches. These switches are attached to the metal plate and have red bases. These switches may be adjusted when necessary to change the settings of the IC3600SFUC1. Two (2) additional black potentiometers are positioned on the IC3600SFUC1. These potentiometers are placed closer to the center of the PCB. On the opposite side of the board, there is one integrated circuit which is black and rectangular. The IC3600SFUC1 contains at least seven (7) large transistors. These transistors are circular and made of silver metal. They have been placed all throughout the IC3600SFUC1. Several other transistors which are black may also be found on the IC3600SFUC1 PCB. A variety of capacitors is featured on the IC3600SFUC1. At least three (3) of these capacitors are round and yellow. These are sitting vertically on the IC3600SFUC1. Several other capacitors are solid red and square shaped.