The IC3600SCBE1A is a printed circuit board (PCB) made by General Electric (GE). This part is a component in the Mark I-II turbine control system. The Mark I and Mark II were the first two systems from the Mark series to be introduced.
The IC3600SCBE1A is a rectangular circuit board. One (1) large capacitor is featured near the center of the circuit board. This capacitor is solid colored yellow. The part number 708A1 is printed on the outside of the capacitor. This capacitor has a voltage of two-hundred (200) volts (200V). Above this capacitor, there are two resistors. One of the resistors is positioned at the top edge of the IC3600SCBE1A. This resistor is large in size. It is colored brown and has bands which are light brown, black, yellow, and gold. The resistor is attached with wires to metal components on either side of the circuit board which help to wire the board into the rest of the system. Below this resistor, there is a medium-sized resistor. This resistor is also brown. It has bands which are grey, yellow, pink, and red. This resistor also has wires which connect it to the metal components that wire the board into the system. The IC3600SCBE1A features a line of large metal prongs along the right edge of the circuit board. The IC3600SCBE1A is labeled with yellow print. The components in the center of the circuit board are labeled with the letters A through F. On the right side of the IC3600SCBE1A are the numbers 10 to 50 by tens.