The IC3600SCBD2 is a printed circuit board or PCB made to be a component in the Mark I-II gas turbine control series. These series are the first and second generations of the Mark series. The Mark turbine control series are responsible for controlling and automating the functions of turbines. This includes functions like startup, shutdown, cooldown, and water and fuel injection.
The IC3600SCBD2 consists of a large circuit board which features a large metal plate attached to its side. The IC3600SCBD2 contains two (2) large yellow capacitors. One is situated in the center of the PCB and the other is located at the bottom. Both of the capacitors is labeled with 200V or 200 volts. These two (2) capacitors are positioned among a series of eight (8) medium-sized resistors. These resistors are brown with multi-colored bands in brown, white, orange, red, and gold. Both the resistors and capacitors are attached by wires to metal components which help wire the board into the larger system. Each of these components are labeled with a letter from A through J in yellow print. The large metal plate that is attached to the edge of the circuit board features three (3) large metal transistors. These large transistors are attached to the circuit board with grey wires. The components on the IC3600SCBD2 are labeled with yellow letters or numbers. The printed circuit board’s part number, which is IC3600SCBD2A, in written on the top edge of the device.
Any technical support needs should be addressed to General Electric (GE).