Product Description
The IC3600LRDH1A1 is a GE FANUC Relay Driver card component for the Mark I or Mark II series from GE. The first two Speedtronic gas and steam turbine management series to be released by General Electric, the MKI and MKII have now been in use for decades. Both series are scalable and adaptable to the management of any size or configuration of gas/steam heavy-duty turbine system. The MKI/MKII have been successfully used to manage small 4000 hp remote piping stations just as they have been used to manage full power stations with combined cycle ratings of up to 400 Mw. In each of these systems, the MKI/MKII can be scaled to control the turbine and limit the max output to within the unit’s capabilities. They can sequence regular procedures like startup and shutdown, monitor and annunciate malfunctions, and protect the system from non-recoverable system failures.
The IC3600LRDH1A1 is marked in multiple locations with several pieces of information. It carries the GE logo. It is numbered on one edge. It is marked “STAR” on one edge and has the code “68A999536.” It also carries the codes 003/04, 002/03, and 006/06.
The IC3600LRDH1A1 is built with eighteen transistors of varying design. It is worth noting several of these transistors carry the same designating mark. In other words, more than one transistor may be marked as “Q1” or “Q2.” The board is built with fixed vacuum capacitors and metal film resistors. Diodes are also present on the board, but these may not be marked with an identifying prefix.
Communication on the IC3600LRDH1A1 is achieved through fifty-one metal pins located on one edge. All tech support for this board, including end-user publications like manuals and data sheets, was provided by GE.
