The IC3600KRSE2 is a Relay Card for the Mark I or Mark II series from GE. These two series are part of the successful Speedtronic line. They were the first of these series to be released, and now have several decades of use across thousands of units in some of the most demanding, trying and diverse conditions across the globe. The MKI and MKII have been used in environments with temperature variations from -50C to +50C. They are adaptable and scalable and can be fitted to the needs of the end user. The MKI and MKII can manage turbine systems as large as 400 MW (combined cycle) power plants down to a single 4000 Hp unit.
The IC3600KRSE2 is built with three GE reed relays. Each relay is marked on its cover with a wiring diagram that explains how the colored wires relate to each other. The relay covers also give the following information: Coil VDC, Cont. 10 VA. 68A992019A02. N.P. 68A997245 P2. All relays on this board are exactly alike.
The IC3600KRSE2 has fifty-one pins attached to one edge. The board is numbered under each pair of pins with the addition of a letter code that corresponds to a colored wire coming from the relays (R/G/Y/Bl/V for Red, Green, Yellow, Blue, and Violet.) Each pin is marked with the code for the proper colored wire or wires that may attach to that pin.
Our warehouse ships components protected by a plastic, static-reducing covering. Once you receive your part, we suggest a review of safety data and installation guidelines from any OEM publications (manuals/data sheets) still in your possession before installation begins. All technical support for this part was provided by GE.