About the IC3600AMLB1B
The IC3600AMLB1B is a GE Fanuc Amplifier Circuit Card for the Mark I and Mark II series. The MKI was GE’s first Speedtronic system for gas and steam turbine management. The MKII was released a few years after the MKI, with several improvements. Both systems are designed with four primary parts: the control system, the protection system that runs as an independent back up, the sequential system, with logic required for automatic start-up and shutdown procedures, and the power supply system, which is a self-contained redundant system that makes the overall system independent of external power.
The IC3600AMLB1B is a sparsely populated card. The most prominent component on its surface is a 435K Analog Device Card. This integrated circuit combines factory trimmed accuracy to within 0.1% max with output offset drift of .002% degrees Celsius max. It may be used as a precision squarer, square rooter, or divider.
The IC3600AMLB1B has two trim potentiometers. It has two ceramic through-hole capacitors and two metal film capacitors. The board has several diodes.
The IC3600AMLB1B is marked with the GE logo. It has the code 006/02 and its board identification. One edge is numbered. This edge has been fitted with fifty-one right-angled metal pins, which together act as a backplane. The board is drilled in two corners.
The IC3600AMLB1B will be shipped in a protective, static-reducing sleeve. Before installation begins, we recommend reviewing safety data in OEM manuals or data sheets. Tech support for MKI and MKII components was provided by GE.
