The IC3600AAMA1G1B is a FANUC PCB from GE that has been manufactured for the Mark I and Mark II series. These series can manage GE heavy-duty gas turbines as small as individual units rated at 4000 hp to systems with combined cycles up to 400 Mw. The MKI and MKII systems can function in temperatures ranging from -50C to +50C. Processes like temperature, acceleration, speed, and load are generated and checked electrically.
The IC3600AAMA1G1B is designed with a drill point in two of its corners. The board is marked with the “USA GE” symbol. It is marked with its unique board identification number. “006/12” appears on one edge. One edge is numbered, first “two” then by tens from “ten” to “fifty.” This marking corresponds to a system of twenty-five right angled pins inserted into the board edge.
The IC3600AAMA1G1B has five potentiometers, including one rotary and four trim potentiometers. These components are variable resistors and may be used to divide voltage. In line with the trim potentiometers are three jumper switches. Jumpers are placed on one of two pins to finish off a circuit as determined by the user. The board has one integrated circuit and four transistors.
The IC3600AAMA1G1B has multiple diodes on its surface. Resistors used on the board are both carbon composite resistors and metal film resistors.
Our team will ship the IC3600AAMA1G1B to you in a protective sleeve that will reduce static. If original manufacturer paperwork is available, we recommended technicians review safety data before beginning installation. All technical support for the IC3600AAMA1G1B was provided by GE.