The 193X730AFG02 is a Reverse Driver Board manufactured by GE for DC Drive systems like the Speed Variator Drive and the SCR Drives.
The 193X730AFG02 is designed with a front panel attached to the printed circuit board. The panel includes such information as the board name and number, as well as the General Electric logo. This panel includes a curved front handle that is designed to improve the efficiency of the insertion and removal of the drive for installation and maintenance.
The 193X730AFG02 board has two transformers located near the back edge of the board. The board has over ten transistors. The board has three sets of vertical brackets for holding components above the board surface. One set of brackets holds two wire wound resistors. The second set of brackets holds a polyester vinyl capacitor. The last set of brackets holds a metal film resistor. The board uses polyester vinyl and electrolytic capacitors. Resistors are made of carbon composite material or metal film material. Two of these components are wired to metal pins and are mounted above the board surface. Some components are mounted vertically.
The 193X730AFG02 will be packaged carefully by our warehouse team for shipment to your facility. This includes the use of static-reducing material. Please review retained manuals, data sheets or other publications from the original manufacturer for safety and installation information before your part is unboxed. Only qualified, well-trained personnel should install or maintain this equipment. General Electric provided all the original technical support for this part.