The 193X537ADG01 is what is known as a main control board. This is a type of printed circuit board or PCB made by General Electric. This product was created as a part of the 193x series.
The 193X537ADG01 is a large rectangular printed circuit board with a number of different electronic components. Twelve (12) components which are blue and shaped like squares are located on the bottom half of the PCB. Ten (10) of these are lined up along the board’s edge while the other two (2) are placed closer to the middle of the card. These blue components are labeled with names like LIN TIME, REF SCALE, MIN SPEED, RESPONSE, GAIN, MAX SPEED, COMP, and CUR LIMIT. Seventeen (17) integrated circuits are located on the 193X527ADG01. Most of these integrated circuits are aligned in groups of three (3), six (6), and four (4). Fourteen (14) of the integrated circuits are small and three (3) of them are larger. Each integrated circuit contains an individual network of tiny components. One long resistor which is grey and shaped like a rectangle can be found at the top of the 193X537ADG01. This PCB contains many transistors. Some of these are round and silver and others are smaller and black. Many yellow capacitors in various sizes are positioned on the 193X537ADG01. These sizes range from very small to large. Also placed on the 193X537ADG01 are a number of small resistors. The resistors are covered with bands in different colors such as brown, red, silver, white, and yellow among others.